RTII(4) Kernel Interfaces Manual RTII(4)

NAME

rtiiAIMS Lab Radiotrack II FM radio device driver

SYNOPSIS

option RADIO_TEA5759


rtii0 at isa? port 0x20c
rtii1 at isa? port 0x30c
radio* at rtii0

DESCRIPTION

The rtii driver provides support for the AIMS Lab Radiotrack II FM radio tuners.

The Radiotrack II is a stereo FM tuner that allows to tune in the range 87.5 - 108.0 MHz, report signal status on the current frequency, force audio output to mono, perform hardware signal search, and has an internal AFC.

The Radiotrack II cards take only one I/O port. The I/O port is set by the driver to the value specified in the configuration file and must be either 0x20c or 0x30c.

Philips Semiconductors released two almost identical chips TEA5757 and TEA5759. The TEA5757 is used in FM-standards in which the local oscillator frequency is above the radio frequency (e.g. European and American standards). The TEA5759 is the version in which the oscillator frequency is below the radio frequency (e.g. Japanese standards). The option RADIO_TEA5759 changes the algorithm of frequency calculation for the TEA5757 based cards to conform with the Japanese standards.

SEE ALSO

isa(4), radio(4)

HISTORY

The rtii device driver appeared in OpenBSD 3.0 and NetBSD 1.6.

AUTHORS

The rtii driver was written by Vladimir Popov and Maxim Tsyplakov. The man page was written by Vladimir Popov.
October 8, 2001 NetBSD 6.1