BT_DEV(3) Library Functions Manual BT_DEV(3)

NAME

bt_devaddr, bt_devname, bt_devenum, bt_devinfo, bt_devopen, bt_devsend, bt_devrecv, bt_devreq, bt_devfilter, bt_devfilter_pkt_set, bt_devfilter_pkt_clr, bt_devfilter_pkt_tst, bt_devfilter_evt_set, bt_devfilter_evt_clr, bt_devfilter_evt_tst, bt_devinquiryBluetooth device access routines

LIBRARY

Bluetooth Library (libbluetooth, -lbluetooth)

SYNOPSIS

#include <bluetooth.h>

int
bt_devaddr(const char *name, bdaddr_t *bdaddr);

int
bt_devname(char *name, const bdaddr_t *bdaddr);

int
bt_devenum(int (*cb)(int, const struct bt_devinfo *, void *), void *arg);

int
bt_devinfo(const char *name, struct bt_devinfo *info);

int
bt_devopen(const char *name, int flags);

ssize_t
bt_devsend(int s, uint16_t opcode, void *param, size_t plen);

ssize_t
bt_devrecv(int s, void *buf, size_t size, time_t timeout);

int
bt_devreq(int s, struct bt_devreq *req, time_t timeout);

int
bt_devfilter(int s, const struct bt_devfilter *new, struct bt_devfilter *old);

void
bt_devfilter_pkt_set(struct bt_devfilter *filter, uint8_t type);

void
bt_devfilter_pkt_clr(struct bt_devfilter *filter, uint8_t type);

int
bt_devfilter_pkt_tst(const struct bt_devfilter *filter, uint8_t type);

void
bt_devfilter_evt_set(struct bt_devfilter *filter, uint8_t event);

void
bt_devfilter_evt_clr(struct bt_devfilter *filter, uint8_t event);

int
bt_devfilter_evt_tst(const struct bt_devfilter *filter, uint8_t event);

int
bt_devinquiry(const char *name, time_t timeout, int max_rsp, struct bt_devinquiry **iip);

DESCRIPTION

These routines are designed to provide access to locally configured Bluetooth devices in an operating system independent manner via a socket providing access to Bluetooth HCI packets.

FUNCTIONS

bt_devaddr(name, bdaddr)
Return a Bluetooth device address. bt_devaddr() will return 1 if the NUL-terminated name string refers to a Bluetooth device present in the system, otherwise 0. The name may be given as a device name (eg “ubt0”) or Bluetooth device address (eg “00:11:22:33:44:55”) and the actual device address will be written to bdaddr if not NULL.
bt_devname(name, bdaddr)
Return a Bluetooth device name. bt_devname() returns 1 if the bdaddr refers to a Bluetooth device present in the system, otherwise 0. The name buffer, if given, should have space for at least HCI_DEVNAME_SIZE bytes and the string will be NUL-terminated.
bt_devenum(cb, arg)
Enumerate Bluetooth devices present in the system. For each device found, the cb function (if not NULL) will be called with the arg argument provided, a fully populated bt_devinfo structure and, where the device is enabled, a socket handle as returned by bt_devopen(). The callback function can halt the enumeration by returning a non-zero value, and bt_devenum() returns the number of successfully enumerated devices.
bt_devinfo(name, info)
Obtain information from a Bluetooth device present in the system. The info argument is a pointer to a bt_devinfo structure into which information about device name is placed. The bt_devinfo structure contains at least the following members:

        char        devname[HCI_DEVNAME_SIZE]; 
        int         enabled;    /* device is enabled */ 
 
        /* device information */ 
        bdaddr_t    bdaddr; 
        uint8_t     features[HCI_FEATURES_SIZE]; 
        uint16_t    acl_size;   /* max ACL data size */ 
        uint16_t    acl_pkts;   /* total ACL packet buffers */ 
        uint16_t    sco_size;   /* max SCO data size */ 
        uint16_t    sco_pkts;   /* total SCO packet buffers */ 
 
        /* flow control */ 
        uint16_t    cmd_free;   /* available CMD packet buffers */ 
        uint16_t    acl_free;   /* available ACL packet buffers */ 
        uint16_t    sco_free;   /* available ACL packet buffers */ 
 
        /* statistics */ 
        uint32_t    cmd_sent; 
        uint32_t    evnt_recv; 
        uint32_t    acl_recv; 
        uint32_t    acl_sent; 
        uint32_t    sco_recv; 
        uint32_t    sco_sent; 
        uint32_t    bytes_recv; 
        uint32_t    bytes_sent; 
 
        /* device settings */ 
        uint16_t    link_policy_info; 
        uint16_t    packet_type_info; 
        uint16_t    role_switch_info;

Because a Bluetooth device must be enabled in order to retrieve information, the enabled flag should be tested to be non-zero before relying on further data.

bt_devopen(name, flags)
Return a Bluetooth HCI socket handle bound and connected to the named Bluetooth device or, if name is NULL, enabled to receive packets from any device. The socket should be closed using close(2) after use. Any combination of the following flags may be used to pre-set the socket options:
BTOPT_DIRECTION
Enable control messages on each packet indicating the direction of travel.
BTOPT_TIMESTAMP
Enable control messages providing packet timestamps.

The default filter on the socket will only allow the HCI Event packets “Command Status” and “Command Complete” to be received.

bt_devsend(s, opcode, param, plen)
Send an HCI command packet on the socket s. The opcode should be in host byte order and the param and plen arguments can be used to provide command parameter data. bt_devsend() will return the number of bytes successfully written.
bt_devrecv(s, buf, size, timeout)
Receive a single HCI packet on the socket s. bt_devrecv() will return the number of bytes successfully received unless the provided buffer could not contain the entire packet, or if a timeout was requested with a non-negative timeout value.
bt_devreq(s, req, timeout)
Make an HCI request on the socket s. The req argument is a pointer to a bt_devreq structure, defined as:

struct bt_devreq { 
        uint16_t        opcode; 
        uint8_t         event; 
        void           *cparam; 
        size_t          clen; 
        void           *rparam; 
        size_t          rlen; 
};

bt_devreq() sends an HCI command packet with the given opcode and command parameters of clen bytes at cparam then waits up to timeout seconds for the command to return a “Command Complete” event. In the case where the command returns “Command Status” and an additional event, and where the status indicates that the command is in progress, bt_devreq() will wait for the additional event specified in the request. If required, any response will be copied into the buffer of rlen bytes at rparam, and rlen will be adjusted to indicate the number of bytes stored. bt_devreq() temporarily modifies the socket filter.

bt_devfilter(s, new, old)
Update or extract the packet filter on HCI socket s. Filters can be set to indicate packet types (Commands, Events, ACL and SCO data), and individual event IDs. Where old is given, the currently set filter will be extracted first, then if new is given, the filter will be updated.
bt_devfilter_pkt_set(filter, type)
Set packet type in filter.
bt_devfilter_pkt_clr(filter, type)
Clear packet type from filter.
bt_devfilter_pkt_tst(filter, type)
Test if filter has packet type set.
bt_devfilter_evt_set(filter, event)
Set event ID in filter.
bt_devfilter_evt_clr(filter, event)
Clear event ID from filter.
bt_devfilter_evt_tst(filter, event)
Test if filter has event ID set.
bt_devinquiry(name, timeout, max_rsp, iip)
Perform a Bluetooth Inquiry using the device name, or the first available device if NULL is passed. The inquiry length will be timeout seconds, and the number of responses (up to a limit of max_rsp) will be returned. A pointer to an array of bt_devinquiry structures, defined as:

struct bt_devinquiry { 
        bdaddr_t        bdaddr; 
        uint8_t         pscan_rep_mode; 
        uint8_t         pscan_period_mode; 
        uint8_t         dev_class[3]; 
        uint16_t        clock_offset; 
        int8_t          rssi; 
        uint8_t         data[240]; 
};

will be stored in the location given by iip and this should be released after use with free(3).

RETURN VALUES

These Bluetooth device access routines return -1 on failure, and errno will be set to indicate the error.

ERRORS

In addition to errors returned by the standard C library IO functions, the following errors may be indicated by device access routines.
[EINVAL]
A provided function argument was not valid.
[EIO]
A device response was not properly understood.
[ETIMEDOUT]
An operation exceeded the given time limit.

SEE ALSO

bluetooth(3)

HISTORY

The Bluetooth device access API was created by Maksim Yevmenkin and first appeared in FreeBSD. This implementation written for NetBSD by Iain Hibbert.
October 25, 2011 NetBSD 6.1