runact Command

Purpose

Runs an action on a resource class.

Syntax

runact -s "selection_string" [ -N { node_file"-" } ] [-f resource_data_input_file] [-l-t-d-D delimiter] [-x] [-h] [-TV] resource_class action [in_element=value…] [rsp_element…]

runact -r [-f resource_data_input_file] [-l-t-d-D delimiter] [-x] [-h] [-TV] resource_handle action [in_element=value…] [rsp_element…]

runact -c [-f resource_data_input_file] [-n node_name] [-l-t-d-D delimiter] [-x] [-h] [-TV] resource_class action [in_element=value…] [rsp_element…]

runact -C domain_name… [-f resource_data_input_file] [-l-t-d-D delimiter] [-x] [-h] [-TV] resource_class action [in_element=value…] [rsp_element…]

Description

The runact command requests that the RMC subsystem run the specified action on the specified resource class.

Instead of specifying multiple node names in selection_string, you can use the -N node_file flag to indicate that the node names are in a file. Use -N "-" to read the node names from standard input.

Before you run this command, use the lsactdef command to list the resource class actions that are supported by this resource class. Also, use the lsactdef command to list the required input action elements that must be specified when invoking an action. The lsactdef command also identifies the data type for each input element. The value specified for each input element must match this data type.

Flags

-c
Invokes the action on the resource class.

To invoke the class action on a globalized resource class on all peer domains defined on the management server, set CT_MANAGEMENT_SCOPE=3 and use the -c flag.

-C domain_name…
Invokes a class action on a globalized resource class on one or more RSCT peer domains that are defined on the management server. Globalized classes are used in peer domains and management domains for resource classes that contain information about the domain.
-f resource_data_input_file
Specifies the name of the file that contains resource action input elements and values. Use the lsactdef command with the -i flag to generate a template for this input file.
-d
Specifies delimiter-formatted output. The default delimiter is a colon (:). Use the -D flag if you want to change the default delimiter.
-D delimiter
Specifies delimiter-formatted output that uses the specified delimiter. Use this flag to specify a delimiter other than the default colon (:). An example is when the data to be displayed contains colons. Use this flag to specify a delimiter of one or more characters.
-l
Specifies "long" format — one entry per line. This is the default display format.
-n node_name
Specifies the name of the node on which to run the class action. You can only use this flag in conjunction with the -c flag.
-N { node_file "-" }
Specifies that node names are read from a file or from standard input. Use -N node_file to indicate that the node names are in a file.
  • There is one node name per line in node_file
  • A number sign (#) in column 1 indicates that the line is a comment
  • Any blank characters to the left of a node name are ignored
  • Any characters to the right of a node name are ignored
Use -N "-" to read the node names from standard input.

The CT_MANAGEMENT_SCOPE environment variable determines the scope of the cluster. If CT_MANAGEMENT_SCOPE is not set, management domain scope is chosen first (if a management domain exists), peer domain scope is chosen next (if a peer domain exists), and then local scope is chosen, until the scope is valid for the command. The command runs once for the first valid scope it finds. For example, if a management domain and a peer domain both exist and CT_MANAGEMENT_SCOPE is not set, this command applies to the management domain. If you want this command to apply to the peer domain, set CT_MANAGEMENT_SCOPE to 2.

-r "resource_handle"
Specifies a resource handle. The resource handle must be specified in this format:
"0xnnnn 0xnnnn 0xnnnnnnnn 0xnnnnnnnn 0xnnnnnnnn 0xnnnnnnnn"
where n is a hexadecimal character. Use this flag to invoke the action on the resource that matches resource_handle.
-s "selection_string"
Specifies a selection string. All selection strings must be enclosed within either double or single quotation marks. If the selection string contains double quotation marks, enclose the entire selection string in single quotation marks. For example:
    -s 'Name == "testing"'
    -s 'Name ?= "test"'
Only persistent attributes can be listed in a selection string. For information on how to specify selection strings, see the Administering RSCT.
-t
Specifies table format. Each attribute is displayed in a separate column, with one resource per line.
-x
Suppresses header printing.
-h
Writes the command's usage statement to standard output.
-T
Writes the command's trace messages to standard error. For your software-service organization's use only.
-V
Writes the command's verbose messages to standard output.

Parameters

action
Specifies the name of the action to be invoked.
in_element=value
Specifies the action input element names and values. If you use the -f flag, don't enter any in_element=value pairs on the command line.

in_element is any of the input structured data element names. There should be one in_element_n=value pair for each of the defined structured data (SD) input elements for the specified action. Use lsactdef with the -s i flag to list the input elements for a particular resource class and action. Use lsactdef -i to generate an input file template, which, after appropriate editing, can be used as the input file.

value must be the appropriate datatype for the specified element. For example, if NodeNumber is defined as a uint32 datatype, enter a positive numeric value.

resource_class
Specifies the name of the resource class with the actions that you want to invoke.
resource_handle
Specifies the resource handle for the resource and class with the actions that you want to invoke.
rsp_element
Specifies one or more of action response structured data element names. If you specify one or more element names, only those elements are displayed in the order specified. If you do not specify any element names, all elements of the response are displayed.

Security

This command requires root authority.

Exit Status

0
The command has run successfully.
1
An error occurred with RMC.
2
An error occurred with the command-line interface (CLI) script.
3
An incorrect flag was specified on the command line.
4
An incorrect parameter was specified on the command line.
5
An error occurred with RMC that was based on incorrect command-line input.

Environment Variables

CT_CONTACT
When the CT_CONTACT environment variable is set to a host name or IP address, the command contacts the Resource Monitoring and Control (RMC) daemon on the specified host. If the environment variable is not set, the command contacts the RMC daemon on the local system where the command is being run. The resource class or resources that are displayed or modified by the command are located on the system to which the connection is established.
CT_IP_AUTHENT
When the CT_IP_AUTHENT environment variable exists, the RMC daemon uses IP-based network authentication to contact the RMC daemon on the system that is specified by the IP address to which the CT_CONTACT environment variable is set. CT_IP_AUTHENT only has meaning if CT_CONTACT is set to an IP address; it does not rely on the domain name system (DNS) service.
CT_MANAGEMENT_SCOPE
Determines the management scope that is used for the session with the RMC daemon to monitor and control the resources and resource classes. The management scope determines the set of possible target nodes where the resources and resource classes can be monitored and controlled. The valid values are:
0
Specifies local scope.
1
Specifies local scope.
2
Specifies peer domain scope.
3
Specifies management domain scope.

If this environment variable is not set, local scope is used.

Implementation Specifics

This command is part of the Reliable Scalable Cluster Technology (RSCT) fileset for AIX®.

Standard Output

When the -h flag is specified, this command's usage statement is written to standard output.

The command output and all verbose messages are written to standard output.

Standard Error

All trace messages are written to standard error.

Examples

  1. To invoke the TestClassAction resource class action on the resource class IBM.Example, enter:
    runact -c IBM.Example TestClassAction Int32=99
    The output will look like this:
    Resource Class Action Response for: TestClassAction
    sd_element 1:
       Int32 = 99

Location

/usr/sbin/rsct/bin/runact
Contains the runact command