ntpdate Command

Purpose

Sets the date and time using the Network Time Protocol (NTP). This command only applies to AIX® 4.2 or later.

Syntax

ntpdate [ -b ] [ -c ] [-d ] [  -s ] [  -u ] [  -a Keyid ] [  -e AuthenticationDelay ] [  -k KeyFile ] [  -o Version ] [  -p Samples ] [  -t TimeOut ] Server ...

Description

The ntpdate command sets the local date and time by polling the NTP servers specified to determine the correct time. It obtains a number of samples from each server specified and applies the standard NTP clock filter and selection algorithms to select the best of the samples.

The ntpdate command makes time adjustments in one of the following ways:

Flags

Item Description
-a Keyid Enable the authentication function and authenticate all packets using Keyid. By default, the authentication function is disabled.
-b Step the clock's time by calling the settimeofday subroutine.
-c Slew the clock's time by calling the adjtime subroutine.
-d Specifies debug mode. Determines what results the ntpdate command produces without actually doing them. The results appear on the screen. This flag uses unprivileged ports.
-e AuthenticationDelay Specifies the amount of time in seconds to delay the authentication processing. Typical values range from 0.0001 to 0.003.
-k KeyFile Specifies a different name for the file containing the keys when not using the default /etc/ntp.keys file. See ... for the description of the KeyFile.
-o Version Specifies the NTP version implementation to use when polling its outgoing packets. The values for Version can be 1, 2 or 3. The default is 3.
-p Samples Specifies the number of samples to acquire from each server. The values for Samples can be between 1 and 8 inclusive. The default is 4.
-s Specifies the use of the syslog facility to log actions instead of using standard output. Useful when running the ntpdate command with the cron command.
-t TimeOut Specifies the amount of time to wait for a response. The value given for TimeOut is rounded to a multiple of 0.2 seconds. The default is 1 second.
-u Specifies the use of an unprivileged port to send the packets from. Useful when you are behind a firewall that blocks incoming traffic to privileged ports, and you want to synchronize with hosts beyond the firewall. A firewall is a system or machine that controls the access from outside networks to a private network.

Parameters

Item Description
Server ... Specifies the servers to poll.

Exit Status

This command returns the following exit values:

Item Description
0 Successful completion.
>0 An error occurred.

Security

Access Control: You must have root authority to run this command.

Auditing Events: N/A

Attention RBAC users and Trusted AIX users: This command can perform privileged operations. Only privileged users can run privileged operations. For more information about authorizations and privileges, see Privileged Command Database in Security. For a list of privileges and the authorizations associated with this command, see the lssecattr command or the getcmdattr subcommand.

Examples

To set the local date and time by polling the NTP servers at address 9.3.149.107, enter:

/usr/sbin/ntpdate 9.3.149.107

Output similar to the following appears:

28 Feb 12:09:13 ntpdate [18450]: step time server 9.3.149.107
offset 38.417792 sec

Files

Item Description
/usr/sbin/ntpdate Contains the ntpdate command.
/etc/ntp.keys Contains the default key file.