rlpconf(1M)


rlpconf -- configure remote line printers

Synopsis

/usr/lib/rlpconf

Description

rlpconf configures remote line printers that use the rsh(1) command to send their requests to a printer on a remote host.


NOTE: It is recommended that the rlp commands are not used in UnixWare 7 as the same functionality can be achieved using the standard lp commands.

rlpconf is used interactively. The user is prompted to provide information about the printer, such as the local printer name, the name of the remote host that the printer is attached to, and the name of the printer on the remote host.

rlpconf asks if the printer is the system default. If the printer is to be the default, then /usr/spool/lp/admins/lp/default is updated with the name of the printer.

The configuration information indicating the name of the printer is stored in a file called configuration located in a subdirectory bearing the printer's name under /usr/spool/lp/admins/lp/printers/*/configuration. The local to remote printer mapping is stored in /usr/spool/lp/remote.

The lp user on the remote printer's host must be configured to allow the client to have ``trusted'' lp user access to it (/usr/spool/lp/.rhosts).

Files


/usr/spool/lp/remote

/usr/lib/lp/model/network

/usr/spool/lp/.rhosts

References

lpadmin(1M), rhosts(4tcp), rlpcmd(1), rlpstat(1)
© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 25 April 2004