/etc/party.conf

The party.conf is used to define the different parties you'll be using for your SNMPv2 communication.

Here's the search order that's used to find this file:

/nodecfg/node_name/etc/party.conf, where node_name is the value of the CS_NODENAME configuration string (see getconf and setconf)

/etc/party.conf

The file uses this format:

FriendlyName PartyID TDomain IP-address UDP-port authProtocol privProtocol lifetime maxmessagesize clock authPrivate authPublic-length authPublic privPrivate privPublic-length privPublic

where:

FriendlyName

Unique alphanumeric readable name for the context.

PartyID

Unique object identifier for the context.

TDomain

Transport domain.

IP-address

Address of the host using the party.

UDP-port

Port that the host will be listening to.

authProtocol

Authentication protocol used to authenticate the other host.

privProtocol

Protocol used for packet encryption.

lifetime

Decimal value.

maxmessagesize

Number of octets for the largest supported PDU.

clock

Decimal clock offset value.

authPrivate

32 hex digits.

authPublic-length

Decimal or “Null” (if “Null,” no next field).

authPublic

Hex string of 2*authPublic-length digits.

privPrivate

32 hex digits.

privPublic-length

Decimal or “Null” (if “Null”, no next field).

privPublic

Hex string of 2*privPublic-length digits.

For example:

agent_party .1.3.6.1.6.3.3.1.3.10.0.0.59.5 snmpUDPDomain 10.0.0.59 161 noAuth noPriv 300 484 29F660EA 00000000000000000000000000000000 Null 00000000000000000000000000000000 Null

The agent_party using an object identifier of .1.3.6.1.6.3.3.1.3.10.0.0.59.5 on host 10.0.0.59 is listening to port 161. It's using no authentication for communication and no encryption.

If TDomain (Transport domain) doesn't list an IP address that matches the IP address of an interface on the host running snmpd, there'll be no ports listed in the snmpd output when snmpd is started.

If you see the following line with no ports listed:

Opening port(s):

the IP address listed in TDomain (the agent definition entry in /etc/party.conf) doesn't match the IP address of an interface on the host. You must change the agent definition to include the IP address of the interface where you wish to listen for SNMP requests.

`/etc/party.conf`

Name:

Description:

See also: