devi-elo

Elographics input manager for Photon

Syntax:

devi-elo [general_opts] 
         protocol* [protocol_opts]*
         device* [device_opts]*
         filter* [filter_opts]*

Runs on:

Neutrino

Options:

---

When you use a devi-* driver for a touchscreen device, you need a calibration file. The calibration file is generated from the output produced by the calib utility: calib > calib_file.txt For more information, see the calib utility in the Utilities Reference, and Touchscreens in the Neutrino User's Guide.

---

General options:

-b

Prevent the use of the Ctrl-Alt-Shift-Backspace keychord to exit Photon (permitted by default).

-d device

Device (default: /dev/photon or $PHOTON).

-G

A graphics driver isn't requires when starting a touchscreen driver. This option is useful when you're debugging.

-g input_group

Input group (default: 1).

-l

List the internal modules. Modules are listed in the following format where class is one of: D — Device, P — Protocol, or F — Filter:

module name | date compiled | revision | class
    

-v[v]...

Verbose output. More v characters cause more verbosity.

The protocol and protocol_opts are:

smartset [smartset_opts] [fd fd_opts]|[uart uart_opts]

The protocol modules and their options are:

• smartset — Elographics smartset protocol

  -b baud

  Baud rate (default 9600)

  -R

  Don't reset the device (default: reset it).

The device modules and their options are:

• fd — open a device via open().

  -d device

  The device to open fd on (default /dev/ser1).

  -s

  The input interface is serial (i.e. the module can use devctl() commands that are specific to a serial port).

• uart — access the 8250/16450/16550 UART directly.

  -1

  Use COM1.

  -2

  Use COM2.

  -i irq

  The IRQ for the serial device (default 4).

  -p ioport

  The port of the serial device (default 3f8).

The filter modules and their options are:

• abs — transform and compress absolute coordinate “touch” events.

  -b

  Touching the screen is a right mouse button (default left).

  -c

  Calibrate mode; don't transform coordinates.

  -f filename

  The calibration filename.

  -o x,y

  The origin of the display region (default: the origin of the graphics region).

  -s x,y

  The coordinates of the lower right corner of the display region (default: the width and height of the graphics region).

  -x

  Reverse the x coordinates.

  -y

  Reverse the y coordinates.

Description:

The devi-elo command starts the Elographics input manager for Photon.

Examples:

Connect the Smartset controller to the first serial port. Use the serial manager to get input data. Touching the screen emulates a right mouse button press:

devi-elo smartset fd -d/dev/ser1 abs -b

See also:

devi-*, inputtrap