infocmp(ADM)


infocmp -- compare or print out terminfo descriptions

Syntax

infocmp [ -d ] [ -c ] [ -n ] [ -I ] [ -L ] [ -C ] [ -r ] [ -u ] [ -s d | i | l | c ] [ -v ] [ -V ]
[ -1 ] [ -w width ] [ -A directory ] [ -B directory ] [ termname ... ]

Description

The infocmp command can be used to compare a binary terminfo(F) entry with other terminfo entries, rewrite a terminfo description to take advantage of the use= terminfo field, or print out a terminfo description from the binary file in a variety of formats. In all cases, the Boolean fields will be printed first, followed by the numeric fields, followed by the string fields.

Default options

If no options are specified and zero or one termnames are specified, the -I option will be assumed. If more than one termname is specified, the -d option will be assumed.

Comparison options [ -d ] [ -c ] [ -n ]

The infocmp command compares the terminfo description of the first terminal termname with each of the descriptions given by the entries for the other terminal's termnames. If a capability is defined for only one of the terminals, the value returned will depend on the type of the capability: F for boolean variables, -1 for integer variables, and NULL for string variables.

-d
produce a list of each capability that is different. In this manner, if one has two entries for the same terminal or similar terminals, using infocmp will show what is different between the two entries. This is sometimes necessary when more than one person produces an entry for the same terminal and one wants to see what is different between the two.

-c
produce a list of each capability that is common between the two entries. Capabilities that are not set are ignored. This option can be used as a quick check to see if the -u option is worth using.

-n
produce a list of each capability that is in neither entry. If no termnames are given, the environment variable TERM will be used for both of the termnames. This can be used as a quick check to see if anything was left out of the description.

Source listing options [ -I ] [ -L ] [ -C ] [ -r ]

The -I, -L, and -C options will produce a source listing for each terminal named.

-I
use the terminfo names

-L
use the long C variable name listed in <term.h>

-C
use the termcap names

-r
when using -C, put out all capabilities in termcap form
If no termnames are given, the environment variable TERM will be used for the terminal name.

The source produced by the -C option may be used directly as a termcap entry, but not all of the parameterized strings may be changed to the termcap format. infocmp will attempt to convert most of the parameterized information, but that which it doesn't will be plainly marked in the output and commented out. These should be edited by hand.

All padding information for strings will be collected together and placed at the beginning of the string where termcap expects it. Mandatory padding (padding information with a trailing ``/'') will become optional.

All termcap variables no longer supported by terminfo, but which are derivable from other terminfo variables, will be output. Not all terminfo capabilities will be translated; only those variables which were part of termcap will normally be output. Specifying the -r option will take off this restriction, allowing all capabilities to be output in termcap form.

Note that because padding is collected to the beginning of the capability, not all capabilities are output, mandatory padding is not supported, and termcap strings were not as flexible; it is not always possible to convert a terminfo string capability into an equivalent termcap format. Not all of these strings will be able to be converted. A subsequent conversion of the termcap file back into terminfo format will not necessarily reproduce the original terminfo source.

Some common terminfo parameter sequences, their termcap equivalents, and some terminal types which commonly have such sequences are:

Terminfo Termcap Representative terminals
%p1%c %. adm
%p1%d %d hp, ANSI standard, vt100
%p1%'x'%+%c %+x concept
%i %i ANSI standard, vt100
%p1%?%'x'%>%t%p1%'y'%+%; %>xy concept
%p2 is printed before %p1 %r hp

 +--------------------------+---------+--------------------------+
 |Terminfo                  | Termcap | Representative terminals |
 +--------------------------+---------+--------------------------+
 |%p1%c                     | %.      | adm                      |
 +--------------------------+---------+--------------------------+
 |%p1%d                     | %d      | hp, ANSI standard, vt100 |
 +--------------------------+---------+--------------------------+
 |%p1%'x'%+%c               | %+x     | concept                  |
 +--------------------------+---------+--------------------------+
 |%i                        | %i      | ANSI standard, vt100     |
 +--------------------------+---------+--------------------------+
 |%p1%?%'x'%>%t%p1%'y'%+%;  | %>xy    | concept                  |
 +--------------------------+---------+--------------------------+
 |%p2 is printed before %p1 | %r      | hp                       |
 +--------------------------+---------+--------------------------+

Use= option [ -u ]


-u
produce a terminfo source description of the first terminal termname which is relative to the sum of the descriptions given by the entries for the other terminals' termnames. It does this by analyzing the differences between the first termname and the other termnames and producing a description with use= fields for the other terminals. In this manner, it is possible to retrofit generic terminfo entries into a terminal's description. Or, if two similar terminals exist, but were coded at different times or by different people so that each description is a full description, using infocmp will show what can be done to change one description to be relative to the other.
A capability will get printed with an at-sign (@) if it no longer exists in the first termname, but one of the other termname entries contains a value for it. A capability's value gets printed if the value in the first termname is not found in any of the other termname entries, or if the first of the other termname entries that has this capability gives a different value for the capability than that in the first termname.

The order of the other termname entries is significant. Since the terminfo compiler tic(C) does a left-to-right scan of the capabilities, specifying two use= entries that contain differing entries for the same capabilities will produce different results depending on the order that the entries are given. infocmp will flag any such inconsistencies between the other termname entries as they are found.

Alternatively, specifying a capability after a use= entry that contains that capability will cause the second specification to be ignored. Using infocmp to recreate a description can be a useful check to make sure that everything was specified correctly in the original source description.

Another error that does not cause incorrect compiled files, but will slow down the compilation time, is specifying extra use= fields that are superfluous. infocmp will flag any other termname use= fields that were not needed.

Other options [-s d|i|l|c] [-v] [-V] [-1] [-wwidth]


-s
sort the fields within each type according to the argument below:

d
leave fields in the order that they are stored in the terminfo database

i
sort by terminfo name

l
sort by the long C variable name

c
sort by the termcap name
If no -s option is given, the fields printed out will be sorted alphabetically by the terminfo name within each type, except in the case of the -C or the -L options, which cause the sorting to be done by the termcap name or the long C variable name, respectively.

-v
print out tracing information on standard error as the program runs.

-V
print out the version of the program in use on standard error and exit.

-1
cause the fields to print out one to a line. Otherwise, the fields will be printed several to a line to a maximum width of 60 characters.

-w
change the output to width characters.

Changing data bases [ -A directory ] [ -B directory ]

The location of the compiled terminfo database is taken from the environment variable TERMINFO. If the variable is not defined or the terminal is not found in that location, the system terminfo database, usually in /usr/lib/terminfo, will be used. The options -A and -B may be used to override this location. The -A option will set TERMINFO for the first termname and the -B option will set TERMINFO for the other termnames. With this, it is possible to compare descriptions for a terminal with the same name located in two different databases. This is useful for comparing descriptions for the same terminal created by different people. Otherwise the terminals would have to be named differently in the terminfo database for a comparison to be made.

Diagnostics


malloc is out of space!
There was not enough memory available to process all the terminal descriptions requested. Run infocmp several times, each time including a subset of the desired termnames.

use= order dependency found:
A value specified in one relative terminal specification was different from that in another relative terminal specification.

'use=term' did not add anything to the description.
A relative terminal name did not contribute anything to the final description.

must have at least two terminal names for a comparison to be done.
The -u, -d, and -c options require at least two terminal names.

Files

/usr/lib/terminfo/?/* compiled terminal description database

See also

captoinfo(ADM), ,curses(S-osr5) terminfo(F), tic(C)
© 2005 The SCO Group, Inc. All rights reserved.
SCO OpenServer Release 6.0.0 -- 03 June 2005