giomap_noded(ADM)
giomap_noded --
monitors the USB bus for printer attachment/removal and creates and removes device nodes named to reflect printer's position on the bus
Syntax
/etc/giomap_noded [ -012 ]
Description
giomap_noded is the node daemon process that is spawned
at boot-time, after the USB subsystem has been initialized.
This daemon monitors attachment and removal events on the USB bus.
If the event was associated with a printer
being attached then giomap_noded
creates a device node in /dev/usb for that printer.
The nodes that are created have the following form
/dev/usb/lp.XXXXXX.p.q.r where:
-
XXXXXX is the PCI identifier
for the root hub (these are fixed for root
hub controllers on the motherboard and would vary for expansion cards
if they are moved between PCI slots).
-
.p represents the
pth port of the root hub on a system.
-
.q represents the qth port
of the external hub attached to
the pth port of the root hub.
-
.r represents the rth port
on the external hub attached to
the qth port of the external hub attached to
the pth port of the root hub.
The device name is whatever length that is required to reach the specific
printer (up to 5 external hubs may be present).
At boot time, the rc script that runs giomap_noded
will removes all existing printer nodes
from the /dev/usb directory.
It then runs giomap_noded which creates
the nodes for any printers already attached.
Once it is running giomap_noded
will manage all nodes for dynamically
attached and removed printers.
The optional arguments to giomap_noded are debug levels.
The level numbers (0, 1, and 2) correspond
to the syslogd levels up to,
LOG_NOTICE,
LOG_INFO, and
LOG_DEBUG respectively.
The default (when no argument is provided) is 0.
Exit values
It is intended that giomap_noded
run until the system is shutdown,
if an error does occur, the program exits with a -1.
Privilege
Root privilege is required to run this daemon.
Files
/dev/usb/lp.*-
USB device nodes for the printers
/dev/udi/giomap_node-
Special device node for use only by giomap_noded
See also
syslogd(ADM),
usb(HW)
Standards conformance
giomap_noded is not part of any currently supported standard;
it is an extension of AT&T System V provided by
The SCO Group, Inc.
© 2005 The SCO Group, Inc. All rights reserved.
SCO OpenServer Release 6.0.0 -- 03 June 2005