WPA_SUPPLICANT(8) System Manager's Manual WPA_SUPPLICANT(8)

NAME

wpa_supplicantWPA/802.11i Supplicant for wireless network devices

SYNOPSIS

wpa_supplicant [-BdehLqvw] [-f debug-file] -i ifname -c config-file [-N -i ifname -c config-file ...]

DESCRIPTION

The wpa_supplicant utility is an implementation of the WPA Supplicant component, i.e., the part that runs in the client stations. It implements WPA key negotiation with a WPA Authenticator and EAP authentication with an Authentication Server. In addition, wpa_supplicant controls the roaming and IEEE 802.11 authentication/association support and can be used to configure static WEP keys based on identified networks.

The wpa_supplicant utility is designed to be a “daemon” program that runs in the background and acts as the backend component controlling the wireless connection. It supports separate frontend programs such as the text-based wpa_cli(8) program.

The following arguments must be specified on the command line:

-i ifname
Use the specified wireless interface.
-c config-file
Use the settings in the specified configuration file when managing the wireless interface. See wpa_supplicant.conf(5) for a description of the configuration file syntax and contents.

Changes to the configuration file can be reloaded by sending a SIGHUP signal to the wpa_supplicant process or with the wpa_cli(8) utility, using “wpa_cli reconfigure”.

OPTIONS

The following options are available:
-B
Detach from the controlling terminal and run as a daemon process in the background.
-d
Enable debugging messages. If this option is supplied twice, more verbose messages are displayed. Messages are sent to stdout by default, even when daemonised. This can be changed with the -f flag.
-e
Use an external IEEE 802.1X Supplicant program and disable the internal Supplicant. This option is not normally used.
-f
Specifies a file to send debug messages to when enabled with the -d flag.
-h
Show help text.
-K
Include key information in debugging output.
-L
Display the license for this program on the terminal and exit.
-N -i ifname -c config-file ...
Specify an additional interface and configuration file. If multiple interfaces are specified then wpa_supplicant will manage them all with a single process.
-q
Decrease debugging verbosity (i.e., counteract the use of the -d flag).
-v
Display version information on the terminal and exit.
-w
If the specified interface is not present, wait for it to be added; e.g. a cardbus device to be inserted.

SEE ALSO

ath(4), ipw(4), iwi(4), ral(4), wi(4), wpa_supplicant.conf(5), ifconfig(8), wpa_cli(8)

HISTORY

The wpa_supplicant utility first appeared in NetBSD 4.0.

AUTHORS

The wpa_supplicant utility was written by Jouni Malinen <jkmaline@cc.hut.fi>. This manual page is derived from the README file included in the wpa_supplicant distribution.
January 22, 2010 NetBSD 6.1