NEWFS_MSDOS(8) System Manager's Manual NEWFS_MSDOS(8)

NAME

newfs_msdosconstruct a new MS-DOS (FAT) file system

SYNOPSIS

newfs_msdos [-N] [-@ offset] [-B boot] [-C create-size] [-F FAT-type] [-I volid] [-L label] [-O OEM] [-S sector-size] [-a FAT-size] [-b block-size] [-c cluster-size] [-e dirents] [-f format] [-h heads] [-i info] [-k backup] [-m media] [-n FATs] [-o hidden] [-r reserved] [-s total] [-u track-size] special [disktype]

DESCRIPTION

The newfs_msdos utility creates a FAT12, FAT16, or FAT32 file system on device or file named special, using disktab(5) entry disktype to determine geometry, if required.

The options are as follow:

-N
Don't create a file system: just print out parameters.
-@ offset
Build the filesystem at the specified offset in bytes in the device or file. A suffix s, k, m, g (lower or upper case) appended to the offset specifies that the number is in sectors, kilobytes, megabytes or gigabytes, respectively.
-B boot
Get bootstrap from file.
-C create-size
Create the image file with the specified size. A suffix character appended to the size is interpreted as for the -@ option. The file is created by truncating any existing file with the same name, seeking just before the required size and writing a single 0 byte. As a consequence, the space occupied on disk may be smaller than the size specified as a parameter.
-F FAT-type
FAT type (one of 12, 16, or 32).
-I volid
Volume ID.
-L label
Volume label (up to 11 characters). The label should consist of only those characters permitted in regular DOS (8+3) filenames. The default is “NO_NAME”.
-O OEM
OEM string (up to 8 characters). The default is “NetBSD”.
-S sector-size
Number of bytes per sector. Acceptable values are powers of 2 in the range 512 through 32768.
-a FAT-size
Number of sectors per FAT.
-b block-size
File system block size (bytes per cluster). This should resolve to an acceptable number of sectors per cluster (see below).
-c cluster-size
Sectors per cluster. Acceptable values are powers of 2 in the range 1 through 128. If the block or cluster size are not specified, the code uses a cluster between 512 bytes and 32K depending on the filesystem size.
-e dirents
Number of root directory entries (FAT12 and FAT16 only).
-f format
Specify a standard (floppy disk) format. The standard formats are (capacities in kilobytes): 160, 180, 320, 360, 640, 720, 1200, 1232, 1440, 2880.
-h heads
Number of drive heads.
-i info
Location of the file system info sector (FAT32 only). A value of 0xffff signifies no info sector.
-k backup
Location of the backup boot sector (FAT32 only). A value of 0xffff signifies no backup sector.
-m media
Media descriptor (acceptable range 0xf0 to 0xff).
-n FATs
Number of FATs. Acceptable values are 1 to 16 inclusive. The default is 2.
-o hidden
Number of hidden sectors.
-r reserved
Number of reserved sectors.
-s total
File system size.
-u track-size
Number of sectors per track.

If newfs_msdos receives a SIGINFO signal (see the status argument for stty(1)), a line will be written to the standard error output indicating the name of the device currently being formatted, the sector number being written, and the total number of sectors to be written.

NOTES

If some parameters (e.g. size, number of sectors, etc.) are not specified through options or disktype, the program tries to generate them automatically. In particular, the size is determined as the device or file size minus the offset specified with the -@ option. When the geometry is not available, it is assumed to be 63 sectors, 255 heads. The size is then rounded to become a multiple of the track size and avoid complaints by some filesystem code.

FAT file system parameters occupy a "Boot Sector BPB (BIOS Parameter Block)" in the first of the "reserved" sectors which precede the actual file system. For reference purposes, this structure is presented below.

struct bsbpb { 
    u_int16_t	bps;		/* [-S] bytes per sector */ 
    u_int8_t	spc;		/* [-c] sectors per cluster */ 
    u_int16_t	res;		/* [-r] reserved sectors */ 
    u_int8_t	nft;		/* [-n] number of FATs */ 
    u_int16_t	rde;		/* [-e] root directory entries */ 
    u_int16_t	sec;		/* [-s] total sectors */ 
    u_int8_t	mid;		/* [-m] media descriptor */ 
    u_int16_t	spf;		/* [-a] sectors per FAT */ 
    u_int16_t	spt;		/* [-u] sectors per track */ 
    u_int16_t	hds;		/* [-h] drive heads */ 
    u_int32_t	hid;		/* [-o] hidden sectors */ 
    u_int32_t	bsec;		/* [-s] big total sectors */ 
}; 
/* FAT32 extensions */ 
struct bsxbpb { 
    u_int32_t	bspf;		/* [-a] big sectors per FAT */ 
    u_int16_t	xflg;		/* control flags */ 
    u_int16_t	vers;		/* file system version */ 
    u_int32_t	rdcl;		/* root directory start cluster */ 
    u_int16_t	infs;		/* [-i] file system info sector */ 
    u_int16_t	bkbs;		/* [-k] backup boot sector */ 
};

EXAMPLES

newfs_msdos /dev/rwd1a

Create a file system, using default parameters, on /dev/rwd1a.

newfs_msdos -f 1440 -L foo /dev/rfd0a

Create a standard 1.44M file system, with volume label foo, on /dev/rfd0a. Create a 30MB image file, with the FAT partition starting 63 sectors within the image file:

newfs_msdos -C 30M -@63s ./somefile

DIAGNOSTICS

Exit status is 0 on success and 1 on error.

SEE ALSO

disktab(5), disklabel(8), fdisk(8), newfs(8)

HISTORY

The newfs_msdos command first appeared in NetBSD 1.3.

AUTHORS

Robert Nordier <rnordier@FreeBSD.org>.
March 26, 2009 NetBSD 6.1