SES(4) Kernel Interfaces Manual SES(4)

NAME

sesSCSI Environmental Services Driver

SYNOPSIS

ses* at scsibus? target?
lun?

DESCRIPTION

The ses driver provides support for all SCSI devices of the environmental services class that are attached to the system through a supported SCSI Host Adapter, as well as emulated support for SAF-TE (SCSI Accessible Fault Tolerant Enclosures). The environmental services class generally are enclosure devices that provide environmental information such as number of power supplies (and state), temperature, device slots, and so on.

A SCSI Host adapter must also be separately configured into the system before a SCSI Environmental Services device can be configured.

IOCTLS

The following ioctl(2) calls apply to SES devices. They are defined in the header file <scsipi/ses.h> (q.v.).
SESIOC_GETNOBJ
Used to find out how many SES objects are driven by this particular device instance.
SESIOC_GETOBJMAP
Read, from the kernel, an array of SES objects which contains the object identifier, which sub-enclosure it is in, and the SES type of the object.
SESIOC_GETENCSTAT
Get the overall enclosure status.
SESIOC_SETENCSTAT
Set the overall enclosure status.
SESIOC_GETOBJSTAT
Get the status of a particular object.
SESIOC_SETOBJSTAT
Set the status of a particular object.
SESIOC_GETTEXT
Get the associated help text for an object (not yet implemented). SES devices often have descriptive text for an object which can tell you things like location (e.g, "left power supply").
SESIOC_INIT
Initialize the enclosure.

FILES

/dev/sesN
The Nth ses device.

DIAGNOSTICS

When the kernel is configured with DEBUG enabled, the first open to an SES device will spit out overall enclosure parameters to the console.

SEE ALSO

getencstat(8), sesd(8), setencstat(8), setobjstat(8)

HISTORY

The ses driver was written for the SCSI subsystem by Matthew Jacob. This is the functional equivalent of a similar driver available in Solaris, Release 7.
May 24, 2007 NetBSD 6.1