ENIC(4) Kernel Interfaces Manual ENIC(4)

NAME

enic — eMIPS ExtensibleNIC Ethernet interface driver enic* at ebus0 addr ?

DESCRIPTION

The enic interface provides access to a Ethernet network via the eMIPS builtin eNIC (Extensible Network Interface Controller - Ethernet) interface.

Each of the host's network addresses is specified at boot time with an SIOCSIFADDR ioctl(2). The enic interface employs the Address Resolution Protocol (ARP) described in arp(4) to dynamically map between Internet and Ethernet addresses on the local network.

Multicast Ethernet frames are unconditionally received and must be filtered in software.

HARDWARE

emips

The ENIC interface is present on the BEE3 and Xilinx XUP boards. The interface speed is wired at 1Gbps.

DIAGNOSTICS

enic%d: enic_put: no mem?
The driver could not allocate a transmit buffer, packet was not sent.
enic%d: internal error
This and other messages are indicative of bad hardware or software driver coding errors.

SEE ALSO

arp(4), ifmedia(4), inet(4), intro(4), ifconfig(8)

HISTORY

enic driver first appeared in NetBSD 6.0.
July 27, 2010 NetBSD 6.1