BLUETOOTH(4) Kernel Interfaces Manual BLUETOOTH(4)

NAME

bluetoothBluetooth Protocol Family

SYNOPSIS

#include <netbt/bluetooth.h>
#include <netbt/hci.h>
#include <netbt/l2cap.h>
#include <netbt/rfcomm.h>

DESCRIPTION

The Bluetooth Protocol Family

ADDRESSING

Bluetooth Protocol Family sockets all use a sockaddr_bt structure which contains a Bluetooth Device Address (BDADDR). This consists of a six byte string in least significant byte first order.

struct sockaddr_bt { 
	uint8_t		bt_len; 
	sa_family_t	bt_family; 
	bdaddr_t	bt_bdaddr; 
	uint16_t	bt_psm; 
	uint8_t		bt_channel; 
};

The local address used by the socket can be set with bind(2).

PROTOCOLS

Protocols included are:
BTPROTO_HCI
This gives raw access to the Host Controller Interface of local devices using the HCI protocol as described in the Bluetooth Core Specification. Any user may open an HCI socket but there are limitations on what unprivileged users can send and receive. The local address specified by bind(2) may be used to select the device that the socket will receive packets from. If BDADDR_ANY is specified then the socket will receive packets from all devices on the system. connect(2) may be used to create connections such that packets sent with send(2) will be delivered to the specified device, otherwise sendto(2) should be used.

The bt_psm and bt_channel fields in the sockaddr_bt structure are ignored by HCI protocol code and should be set to zero.

HCI socket options:

SO_HCI_EVT_FILTER [struct hci_filter]
This filter controls which events will be received at the socket. See <netbt/hci.h> for available events. By default, Command_Complete and Command_Status events only are enabled.
SO_HCI_PKT_FILTER [struct hci_filter]
This filter controls the type of packets that will be received at the socket. By default, Event packets only are enabled.
SO_HCI_DIRECTION [int]
When set, this enables control messages on packets received at the socket indicating the direction of travel of the packet.

HCI sysctl(8) controls:

net.bluetooth.hci.sendspace
Default send buffer size for HCI sockets.
net.bluetooth.hci.recvspace
Default receive buffer size for HCI sockets
net.bluetooth.hci.acl_expiry
If set, this is the time in seconds after which unused ACL data connections will be expired. If zero, connections will not be closed.
net.bluetooth.hci.memo_expiry
Time, in seconds, that the system will keep records of Bluetooth devices in the vicinity after an Inquiry Response packet has been received. This information is used for routing purposes.
net.bluetooth.hci.eventq_max
The maximum number of packets on the low level Event queue.
net.bluetooth.hci.aclrxq_max
The maximum number of packets on the low level ACL queue.
net.bluetooth.hci.scorxq_max
The maximum number of packets on the low level SCO queue.
BTPROTO_L2CAP
L2CAP sockets give sequential packet access over channels to other Bluetooth devices and make use of the bt_psm field in the sockaddr_bt structure to select the Protocol/Sevice Multiplexer to specify when making connections. If the special value of L2CAP_PSM_ANY is bound when the listen(2) call is made, the next available PSM from the dynamic range above 0x1001 will be selected and may be discovered using the getsockname(2) call.

L2CAP socket options:

SO_L2CAP_IMTU [uint16_t]
Incoming MTU
SO_L2CAP_OMTU [uint16_t]
Outgoing MTU (read-only)
SO_L2CAP_LM [int]
Link Mode. The following bits may be set:

L2CAP_LM_AUTH
Request authentication (pairing).
L2CAP_LM_ENCRYPT
Request encryption (includes auth).
L2CAP_LM_SECURE
Request secured link (encryption, plus change link key).

Link mode settings will be applied to the baseband link during L2CAP connection establishment. If the L2CAP connection is already established, EINPROGRESS may be returned, and it is not possible to guarantee that data already queued (from either end) will not be delivered. If the mode change fails, the L2CAP connection will be aborted.

L2CAP sysctl(8) controls:

net.bluetooth.l2cap.sendspace
Default send buffer size for L2CAP sockets.
net.bluetooth.l2cap.recvspace
Default receive buffer size for L2CAP sockets.
net.bluetooth.l2cap.rtx
Response Timeout eXpiry for L2CAP signals.
net.bluetooth.l2cap.ertx
Extended Response Timeout eXpiry for L2CAP signals.
BTPROTO_RFCOMM
RFCOMM sockets provide streamed data over Bluetooth connection and make use of the bt_psm, and bt_channel fields in the sockaddr_bt structure. The channel number must be between 1 and 30 inclusive except that if the special value RFCOMM_CHANNEL_ANY is bound, when the listen(2) call is made, the first unused channel for the relevant bdaddr will be allocated and may be discovered using the getsockname(2) call. If no PSM is specified, a default value of L2CAP_PSM_RFCOMM (0x0003) will be used.

RFCOMM socket options:

SO_RFCOMM_MTU [uint16_t]
Maximum Frame Size to use for this link.
SO_RFCOMM_LM [int]
Link Mode. The following bits may be set at any time:

RFCOMM_LM_AUTH
Request authentication (pairing).
RFCOMM_LM_ENCRYPT
Request encryption (includes auth).
RFCOMM_LM_SECURE
Request secured link (encryption, plus change link key).

Link mode settings will be applied to the baseband link during RFCOMM connection establishment. If the RFCOMM connection is already established, EINPROGRESS may be returned, and it is not possible to guarantee that data already queued (from either end) will not be delivered. If the mode change fails, the RFCOMM connection will be aborted.

RFCOMM sysctl(8) controls:

net.bluetooth.rfcomm.sendspace
Default send buffer size for RFCOMM sockets.
net.bluetooth.rfcomm.recvspace
Default receive buffer size for RFCOMM sockets.
net.bluetooth.rfcomm.default_mtu
Maximum Frame Size (N1)
net.bluetooth.ack_timeout
Acknowledgement Timer (T1)
net.bluetooth.mcc_timeout
Response Timer for Multiplexer Control Channel (T2)
BTPROTO_SCO
SCO sockets provide sequential packet access to time sensitive data channels over Bluetooth connections, typically used for audio data.

SCO socket options:

SO_SCO_MTU [uint16_t]
Maximum packet size for use on this link. This is read-only and will be set by the protocol code when a connection is made. Currently, due to limitations in the ubt(4) driver, the SCO protocol code will only accept packets with exactly this size.
SO_SCO_HANDLE [uint16_t]
Connection handle for this link. This is read-only and provided for informational purposes only.

SCO sysctl(8) controls:

net.bluetooth.sco.sendspace
Default send buffer size for SCO sockets.
net.bluetooth.sco.recvspace
Default receive buffer size for SCO sockets.

INFORMATION

The following ioctl(2) calls may be used to manipulate Bluetooth devices. The ioctl(2) must be made on BTPROTO_HCI sockets. All of the requests take a btreq structure defined as follows as their parameter and unless otherwise specified, use the btr_name field to identify the device.

struct btreq { 
    char btr_name[HCI_DEVNAME_SIZE];	/* device name */ 
 
    union { 
	struct { 
	    bdaddr_t btri_bdaddr;	/* device bdaddr */ 
	    uint16_t btri_flags;	/* flags */ 
	    uint16_t btri_num_cmd;	/* # of free cmd buffers */ 
	    uint16_t btri_num_acl;	/* # of free ACL buffers */ 
	    uint16_t btri_num_sco;	/* # of free SCO buffers */ 
	    uint16_t btri_acl_mtu;	/* ACL mtu */ 
	    uint16_t btri_sco_mtu;	/* SCO mtu */ 
	    uint16_t btri_link_policy;	/* Link Policy */ 
	    uint16_t btri_packet_type;	/* Packet Type */ 
	    uint16_t btri_max_acl;	/* max ACL buffers */ 
	    uint16_t btri_max_sco;	/* max SCO buffers */ 
	} btri; 
	struct { 
	    uint8_t btrf_page0[HCI_FEATURES_SIZE]; /* basic */ 
	    uint8_t btrf_page1[HCI_FEATURES_SIZE]; /* extended */ 
	} btrf; 
	struct bt_stats btrs;   /* unit stats */ 
    } btru; 
}; 
 
#define btr_flags	btru.btri.btri_flags 
#define btr_bdaddr	btru.btri.btri_bdaddr 
#define btr_num_cmd	btru.btri.btri_num_cmd 
#define btr_num_acl	btru.btri.btri_num_acl 
#define btr_num_sco	btru.btri.btri_num_sco 
#define btr_acl_mtu	btru.btri.btri_acl_mtu 
#define btr_sco_mtu	btru.btri.btri_sco_mtu 
#define btr_link_policy btru.btri.btri_link_policy 
#define btr_packet_type btru.btri.btri_packet_type 
#define btr_max_acl	btru.btri.btri_max_acl 
#define btr_max_sco	btru.btri.btri_max_sco 
#define btr_features0	btru.btrf.btrf_page0 
#define btr_features1	btru.btrf.btrf_page1 
#define btr_stats	btru.btrs 
 
/* btr_flags */ 
#define BTF_UP			(1<<0)	/* unit is up */ 
#define BTF_RUNNING		(1<<1)	/* unit is running */ 
#define BTF_XMIT_CMD		(1<<2)	/* transmitting CMD packets */ 
#define BTF_XMIT_ACL		(1<<3)	/* transmitting ACL packets */ 
#define BTF_XMIT_SCO		(1<<4)	/* transmitting SCO packets */ 
#define BTF_INIT_BDADDR		(1<<5)	/* waiting for bdaddr */ 
#define BTF_INIT_BUFFER_SIZE	(1<<6)	/* waiting for buffer size */ 
#define BTF_INIT_FEATURES	(1<<7)	/* waiting for features */ 
#define BTF_NOOP_ON_RESET	(1<<8)	/* wait for No-op on reset */ 
#define BTF_INIT_COMMANDS	(1<<9)	/* waiting for supported commands */ 
#define BTF_MASTER		(1<<10)	/* request Master role */ 
 
struct bt_stats { 
	uint32_t	err_tx; 
	uint32_t	err_rx; 
	uint32_t	cmd_tx; 
	uint32_t	evt_rx; 
	uint32_t	acl_tx; 
	uint32_t	acl_rx; 
	uint32_t	sco_tx; 
	uint32_t	sco_rx; 
	uint32_t	byte_tx; 
	uint32_t	byte_rx; 
}; 
SIOCGBTINFO
Get Bluetooth device Info. Given the device name, fill in the btreq structure including the address field for use with socket addressing as above.
SIOCGBTINFOA
Get Bluetooth device Info from Address. Given the device address, fill in the btreq structure including the name field.
SIOCNBTINFO
Next Bluetooth device Info. If name field is empty, the first device will be returned. Otherwise, the next device will be returned. Thus, you can cycle through all devices in the system.
SIOCSBTFLAGS
Set Bluetooth device Flags. Not all flags are settable.
SIOCGBTFEAT
Get Bluetooth device Features. This returns the cached basic (page 0) and extended (page 1) features.
SIOCSBTPOLICY
Set Bluetooth device Link Policy. Link Policy bits are defined in <netbt/hci.h>, though you can only set bits that the device supports.
SIOCSBTPTYPE
Set Bluetooth device Packet Types. You can only set packet types that the device supports.
SIOCGBTSTATS
Read device statistics.
SIOCZBTSTATS
Read device statistics, and zero them.

Only the super-user may change device configurations.

SEE ALSO

bind(2), getsockname(2), bluetooth(3), bcsp(4), bt3c(4), btbc(4), btuart(4), options(4), ubt(4)

HISTORY

The Bluetooth Protocol Stack was written for NetBSD 4.0 by Iain Hibbert under the sponsorship of Itronix, Inc.
November 20, 2010 NetBSD 6.1