ATARAID(4) Kernel Interfaces Manual ATARAID(4)

NAME

ataraidsoftware BIOS RAID

SYNOPSIS

pseudo-device ataraid
ld* at ataraid? vendtype ? unit ?

DESCRIPTION

The ataraid driver provides support for BIOS-based software RAID controllers. These are devices which have some simple support for several basic RAID levels (often RAID 0 and RAID 1), but which require software support to actually perform the RAID function. The BIOS support is largely just to create and recognize the array so that it may be a boot device.

The driver currently supports RAID formats from:

Status of the logical disk as well as the disks associated with it, can be viewed through the bioctl(8) utility.

SEE ALSO

ld(4), bioctl(8)

HISTORY

The ataraid driver first appeared in NetBSD 2.0.

AUTHORS

The ataraid driver was originally adapted from FreeBSD by Jason Thorpe <thorpej@NetBSD.org>.

BUGS

Not all features of the software RAID are currently recognized or supported. For example, the Adaptec support doesn't recognize when a RAID 1 should be in a “building” state, and it does not do the right thing.

At least part of the reason for this is that the publically-available information on these formats is quite limited.

September 16, 2008 NetBSD 6.1