Note: The information in this article is structured as help information for the System Management Interface Tool (SMIT) and is not intended for general reading.
Portmaster Adapter/A refers here to any of the Portmaster adapters, including the 4-Port Multiprotocol Communications Controller and the Realtime Interface Co-Processor Portmaster Adapters.
Add, remove, or configure a device driver that is or will be associated with a Portmaster Adapter/A.
Manage the Multiprotocol Quad Port (MPQP) device driver that operates on the 4-Port Multiprotocol Communications Controller.
Add a multiprotocol device driver to work with one of the available adapters.
Dissociate a multiprotocol device driver from the adapter with which it is now associated.
Configure a device driver, taking it from the defined state to the available state.
Manage the ports that are supported by this device driver.
Manage the device driver that will be associated with the Multiport/2 adapter.
Manage the device driver that will be associated with the X.25 Co-Processor/2 or Multiport/2 adapter.
Manage the device driver that will be associated with the X.25 Co-Processor/2 Adapter.
Change and/or show the characteristics of the X.25 Co-Processor/2 Device Driver. This includes network, packet, frame and other parameters.