entioctl Ethernet Device Handler Entry Point

Purpose

Note: This function is supported in AIX® 5.1 and earlier only.

Provides various functions for controlling the Ethernet device.

Syntax

#include <sys/device.h>
#include <sys/devinfo.h>
#include <sys/ioctl.h>
#include <sys/comio.h>
#include <sys/entuser.h>

int entioctl (devno, cmd, arg, devflag, chan, ext) dev_t devno; int cmd, arg; ulong devflag; int chan, ext;

Parameters

Item	Description
devno	Specifies major and minor device numbers.
cmd	Specifies which operation to perform. The possible entioctl operation codes can be found in the /usr/include/sys/ioctl.h and /usr/include/sys/comio.h files.
arg	Specifies the address of the entioctl parameter block.
devflag	Specifies a parameter ignored by the Ethernet device handler.
chan	Specifies the channel number assigned by the entmpx routine.
ext	Specifies a parameter not used by the Ethernet device handler.

Description

The entioctl Ethernet device-handler entry point provides various functions for controlling the Ethernet device. Common entioctl operations are supplemented by entioctl operations available for diagnostic purposes.

The entioctl entry point functions with an Ethernet High-Performance LAN adapter that has been correctly configured for use on a qualified network. Consult the adapter specifications for more information on configuring the network adapter and network qualifications.

These are the common valid entioctl operations:

Operation	Description
CCC_GET_VPD	Returns vital product data (VPD) about the adapter.
CIO_GET_FASTWRT	Provides the parameters required to issue a fast write.
CIO_GET_STAT	Returns the current adapter and device handler status.
CIO_HALT	Halts a session and removes the registered network ID.
CIO_QUERY	Returns the current random access storage (RAS) counter values.
CIO_START	Starts a session and registers a network ID.
ENT_SET_MULTI	Sets or resets a multicast address.
IOCINFO	Returns I/O character information.

The following entioctl operations are for diagnostic purposes:

Operation	Description
CCC_TRCTBL	Returns the address of the internal device driver trace table.
CIO_MEM_ACC	Reads or writes data from or to selected adapter RAM addresses.
CIO_POS_ACC	Reads or writes a byte from or to a selected adapter POS register
CIO_REG_ACC	Reads or writes a byte from or to a selected adapter I/O register.

The following are DMA facilities operations:

Operation	Description
ENT_LOCK_DMA	Sets up (locks) a user buffer to DMA from or to the adapter.
ENT_UNLOCK_DMA	Clears (unlocks) a user buffer from DMA control.

Execution Environment

An entioctl entry point can be called from the process environment only.