CIO_HALT (Halt Device) tokioctl Token-Ring Device Handler Operation

Purpose

Note: This function is supported in AIX® 5.1 and earlier only.

Ends a session with the token-ring device handler.

Description

The CIO_HALT tokioctl operation ends a session with the token-ring device handler. The caller indicates the network ID to halt. This CIO_HALT operation corresponds to the CIO_START operation successfully issued with the specified network ID. A CIO_HALT operation should be issued for each CIO_START operation.

Data for the specified network ID is no longer received. Data received for the specified network ID, before the halt, is still passed up to a user-mode caller by tokselect and tokread entry points. Data is passed back to a kernel-mode caller by the rx_fn routine specified at open time.

For the CIO_HALT operation, the arg parameter points to the session_blk structure. This structure is defined in the /usr/include/sys/comio.h file and contains the following fields:

Field Description
status Returns one of the following status values:
netid Specifies the network ID. The network ID is placed in the least significant byte of the netid field. When terminating the medium-access control (MAC) frame session, the netid field should be set to TOK_MAC_FRAME_NETID.

The CIO_HALT operation functions with a Token-Ring High Performance Network Adapter that has been correctly configured for use on a qualified network. Consult adapter specifications for more information on configuring the adapter and network qualifications.

Execution Environment

The CIO_HALT operation can be called from the process environment only.

Return Values

Item Description
EFAULT Indicates the specified address is not valid.
EINVAL Indicates a parameter is not valid.
ENOMSG Indicates an error occurred.