Sends a SCSI REPORT LUNs command to a remote port of the end device.
Common Host Bus Adapter Library (libHBAAPI.a)
#include <sys/hbaapi.h>
HBA_STATUS HBA_SendReportLUNs (handle, PortWWN, pRspBuffer, RspBufferSize, pSenseBuffer, SenseBufferSize)
HBA_HANDLE handle;
HBA_WWN PortWWN;
void *pRspBuffer;
HBA_UINT32 RspBufferSize;
void *pSenseBuffer;
HBA_UINT32 SenseBufferSize;
The HBA_SendReportLUNs subroutine sends a SCSI REPORT LUNs command through a call to ioctl with the SCIOLCMD operation as its argument. The arg parameter for the SCIOLCMD operation is the address of a scsi_iocmd structure. This structure is defined in the /usr/include/sys/scsi_buf.h file. The scsi_iocmd parameter block allows the caller to select the SCSI and LUN IDs to be queried. The caller also specifies the SCSI command descriptor block area, command length (SCSI command block length), the time-out value for the command, and a flags field.
If successful, the report LUNs data is returned in pRspBuffer. The returned report LUNs data must be examined to see if the requested LUN exists.
Item | Description |
---|---|
handle | Specifies the open file descriptor obtained from a successful call to the open subroutine. |
PortWWN | Specifies the world wide name or port name of the target device. |
pRspBuffer | Points to a buffer containing the requested instruction for a send/read capacity request to an open adapter. |
RspBufferSize | Specifies the size of the buffer to the pRspBuffer parameter. |
pSenseBuffer | Points to a buffer containing the data returned from a send/read capacity request to an open adapter. |
SenseBufferSize | Specifies the size of the buffer to the pSenseBuffer parameter. |
Upon successful completion, the HBA_SendReportLUNs subroutine returns a buffer in bytes containing the SCSI report of LUNs, a buffer containing the SCSI sense data, and a value of HBA_STATUS_OK, or a value of 0.
If unsuccessful, an empty buffer for the SCSI report of LUNs, a response buffer containing the failure, and a value of HBA_STATUS_ERROR, or a value of 1 is returned.
Item | Description |
---|---|
HBA_STATUS_OK | A value of 0 on successful completion. |
HBA_STATUS_ERROR | A value of 1 if an error occurred. |
HBA_STATUS_ERROR_INVALID_HANDLE | A value of 3 if there was an invalid file handle. |
HBA_STATUS_ERROR_ILLEGAL_WWN | A value of 5 if the world wide name was not recognized. |
HBA_STATUS_SCSI_CHECK_CONDITION | A value of 9 if a SCSI Check Condition was reported. |