snmpdv3.conf File

Purpose

Defines a sample configuration file for the snmpdv3 agent.

Description

An entry must be contained on one line (i.e., the newline character will be treated as the end of an entry) All of the entry definitions require that all fields on the entry are specified, either with a specific value or a dash (-) to denote the default value. If an error is detected processing an entry and no appropriate default value can be assumed, the entry will be discarded. Statements in the file are not order-dependent. However, if more than one DEFAULT_SECURITY statement is found, the last one in the file is the one that is used.

General Usage Rules

Comments may be entered in the snmpdv3.conf file, with the following restrictions:
  • Comments must begin with the pound sign (#) or asterisk (*).
  • Comments must begin in column 1. This allows the pound sign and asterisk to be used in names of users, views, etc.
USM_USER entries
Defines a user for the User-based Security Model (USM). Format is:
userName engineID authProto authKey privProto privKey keyType storageType
where
userName
Indicates the name of the user for the User-based Security Model (USM) and must be unique to the SNMP agent. The userName is used as the security name for the User-based Security Model. The contents of this field will be used as the securityName value for other entries (such as the VACM_GROUP entry) when the securityModel is USM. Valid value is:
  • An octet string of 1 to 32 octets (characters).
There is no default value.
engineID
Indicates the engineID of the authoritative side of the message. The engineID for the AIX SNMP agent is determined at agent initialization. It is either read in from the SNMPD.BOOTS file or it is generated automatically and stored in the SNMPD.BOOTS file. It can be retrieved dynamically by issuing a get request for object snmpEngineID. For get, getbulk, set, response, and trap messages, the authoritative side is the SNMP agent. For inform messages, the authoritative side is the notification receiver.
Note: The engineID is defined in RFC 2271.
Valid values are:
  • An octet string of 1 to 32 octets (2 to 64 hex digits).
  • A '-' (dash) indicates the default value.
The default value is the local SNMP agent's engineID.
authProto
Indicates the authentication protocol to be used on authenticated messages on behalf of this user. Valid values are:
  • HMAC-MD5 - indicates HMAC-MD5.
  • HMAC-SHA - indicates HMAC-SHA.
  • none - indicates no authentication is to be done.
  • '-' (dash) - indicates the default value.
A The default value is HMAC-MD5 (if an authentication key is specified; if no authentication key is specified, no authentication can be done for messages to/from this user).
authKey
Indicates the authentication key to be used in authenticating messages on behalf of this user. This field will be ignored when authProto is specified as none. The keyType field will indicate whether the key is localized or non-localized. Valid values are:
  • An octet string of 16 bytes (32 hex digits) when authProto is HMAC-MD5.
  • An octet string of 20 bytes (40 hex digits) when authProto is HMAC-SHA.
  • A '-' (dash) indicates the default.
The default value is no key, indicating no authentication.
privProto
Indicates the privacy protocol to be used on encrypted messages on behalf of this user. Privacy can be requested only if authentication is also requested. If authentication is not requested, this field is ignored. Valid values are:
  • DES - indicates CBC-DES (only with the additional encryption product).
  • none - indicates no privacy.
  • A '-' (dash) indicates default.
The default value is no privacy. No encryption will be done on messages to/from this user.
privKey
The privacy key to be used in authenticating messages to and from this user. This field will be ignored when privProto is specified or defaulted as none. The keyType field will indicate whether the key is localized or non-localized. Privacy can be requested only if authentication is also requested. If authentication is not requested, this field is ignored. The privacy key and the authentication key are assumed to have been generated using the same authentication protocol (HMAC-MD5 or HMAC-SHA). Valid values are:
  • An octet string of 16 bytes (32 hex digits) if the key is localized or if the key is non-localized and the authProto is HMAC-MD5.
  • An octet string of 20 bytes (40 hex digits) if the key is non-localized and the authProto is HMAC-SHA.
  • The '-' (dash) indicates default.
Default value is no key, indicating no encryption.
keyType
Indicates whether the keys defined by authKey and privKey are localized or non-localized. Localized indicates that they have been generated with the appropriate engineID making the key usable only at one snmpEngine. Non-localized indicates the key may be used at different snmpEngines. The authKey and privKey, if both are specified, must both be localized or both be non-localized. This field is ignored if no authentication or privacy is requested. Valid values are:
  • L - indicates keys are localized.
  • N - indicates keys are non-localized.
  • '-' (dash) indicates default Default value is localized.
storageType
Indicates the type of storage in which this definition is to be maintained. StorageTypes are defined in RFC1903. Valid values are:
  • nonVolatile - indicates the entry definition will persist across reboots of the SNMP agent, but it can, however, be changed or even deleted by dynamic configuration requests.
  • permanent - indicates the entry definition will persist across reboots of the SNMP agent; it can be changed but not deleted by dynamic configuration requests
  • readonly - indicates the entry definition will persist across reboots of the SNMP agent; it cannot be changed or deleted by dynamic configuration requests. readOnly is not permitted if the authentication protocol is not 'none' (because keys must be changeable per RFC 2274 definition of usmUserStorageType) .
  • '-' (dash) - indicates default.
Default value is non-volatile.
VACM_GROUP entries
Defines a security group (made up of users or communities) for the View-based Access Control Model (VACM). Format is:
groupName securityModel securityName storageType
where:
groupName
Indicates the group name for the View-based Access Control Model (VACM) and must be unique to the SNMP agent. Valid value is:
  • An octet string of 1 to 32 octets (characters).
There is no default value.
securityModel
Indicates the SNMP security model for this entry. When an SNMP message comes in, the securityModel together with the securityName are used to determine to which group the user (or community) represented by the securityName belongs. Valid values are: 'SNMPv1' - indicates community-based security using SNMPv1 message processing. 'SNMPv2c' - indicates community-based security using SNMPv2c message processing. 'USM' - indicates User-based Security Model. A '-' (dash) - indicates default. Default value is 'USM'.
securityName
Indicates a member of this group. For community-based security, it will be a community name. For the User-based Security Model, it will be a user name. Valid values are:
  • An octet string of 1 to 32 octets (characters) indicating a USM userName when securityModel is USM.
  • An octet string of 1 to 32 octets (characters) indicating a community Name when securityModel is 'SNMPv1' or 'SNMPv2c'.
There is no default value.
StorageType
As defined above on the USM_USER definition.
VACM_VIEW entries
Defines a particular set of MIB data, called a view, for the View-based Access Control Model. Format is:
viewName viewSubtree viewMask viewType storageType
where:
viewName
Indicates the textual name of the view for the View-based Access Control Model. View names do not need to be unique. Multiple entries with the same name together define one view. However, the viewname, together with the subtree object ID, must be unique to an SNMP engine. Valid values are:
  • An octet string of 1 to 32 octets (characters).
There is no default value.
viewSubtree
Indicates the MIB object prefix of the MIB objects in the view. Valid values are:
  • An object id of up to 128 sub-OIDs.
  • A textual object name (or object prefix).
  • A combination of textual object name followed by numeric sub-OIDs. The name must be found within the compiled MIB or in the logical extension to the MIB, the MIBS.DATA file.
There is no default value.
viewMask
Indicates a mask that specifies which of the sub-OIDs in the subtree are relevant. See RFC2275 for a definition of the viewMask. Valid values are:
  • A hex string of up to 16 octets (up to 128 bits) where each bit indicates whether or not the corresponding sub-OID in the subtree is relevant.
  • A '-' (dash) - indicates default.
The default value is a mask of all (meaning all sub-OIDs are relevant).
viewType
Indicates the type of the view definition. Valid values are:
  • included - indicating the MIB objects identified by this view definition are within the view.
  • excluded - indicating the MIB objects identified by this view definition are excluded from the view.
  • A '-' (dash) - indicates default.
The default value is included.
storageType
As defined above on the USM_USER definition.
VACM_ACCESS entries
Identifies the access permitted to different security groups for the View-based Access Control Model.Format is:
groupName contextPrefix contextMatch securityLevel, securityModel 
readView writeView notifyView storageType
where:
groupName
Indicates the group name for the View-based Access Control Model (VACM) for which access is being defined. Valid values are:
  • An octet string of 1 to 32 octets (characters).
There is no default value.
contextPrefix
Indicates an octet string to be compared with the incoming contextName if the value specified for the contextMatch field is prefix. Note, however, that the SNMP agent in AIX supports MIB objects in only the local (null) context. Valid values are:
  • An octet string of 1 to 32 octets (characters).
  • A '-' (dash) - indicates default.
The default value is the null context ("").
contextMatch
Indicates whether the incoming contextName must be compared with (and match exactly) the entire contextName or whether only the first part of the contextName (up to the length of the indicated value of the contextPrefix) must match. Valid values are:
  • exact - indicates entire contextName must match.
  • prefix - indicates only the prefix of the contextName must match.
  • A '-' (dash) - indicates the default.
The default value is exact.
securityLevel
Indicates the securityLevel for this entry. Used in determining which access table entry to use. Valid values are:
  • noAuthNoPriv or 'none' - indicates no authentication or privacy protocols applied.
  • AuthNoPriv or 'auth' - indicates authentication protocols applied but no privacy protocol is applied.
  • AuthPriv or 'priv' - indicates both authentication and privacy protocols applied (If the additional encryption pack is not applied, this level can be configured but cannot actually be used).
  • A '-' (dash) - indicates default.
The default value is noAuthNoPriv.
securityModel
Indicates the SNMP security model for this entry. Used in determining which access table entry to use. Valid values are:
  • SNMPv1 - indicates community-based security using SNMPv1 message processing.
  • SNMPv2c - indicates community-based security using SNMPv2c message processing.
  • USM - indicates User-based Security Model.
  • A '-' (dash) - indicates default.
The default value is USM.
readView
Indicates the name of the view to be applied when read operations (get, getnext, getbulk) are performed under control of this entry in the access table. Valid values are:
  • An octet string of 1 to 32 octets (characters) identifying a view defined by a VACM_VIEW definition.
  • A '-' (dash) - indicates default.
The default value is no view; no readView defined for members of this group.
writeView
Indicates the name of the view to be applied when write operations (set) are performed under control of this entry in the access table. Valid values are:
  • An octet string of 1 to 32 octets (characters) identifying a view defined by a VACM_VIEW definition.
  • A '-' (dash) - indicates default.
The default value is no view; no writeView defined for members of this group.
notifyView
Indicates the name of the view to be applied when notify operations (traps or informs) are performed under control of this entry in the access table. Valid values are:
  • An octet string of 1 to 32 octets (characters) identifying a view defined by a VACM_VIEW definition.
  • A '-' (dash) - indicates default.
Default value is no view; no notifyView defined for members of this group
NOTIFY entries
Identifies management targets to receive notifications. Format is:
notifyName tag type storageType
where:
notifyName
Is a locally unique identifier for this notify definition. Valid values are:
  • An octet string of 1 to 32 octets (characters)
There is no default value.
tag
Indicates a tag value to be compared with the values in the tagLists defined in the snmpTargetAddrTable (either on TARGET_ADDRESS entries or via dynamic configuration). For each match of this tag with a value in the tagLists defined in the snmpTargetAddrTable), a notification may be sent. See RFC2273 for a definition of SnmpTagValue. Valid values are:
  • An octet string of 1 to 255 octets (characters). No delimiters are allowed.
  • A '-' indicates the default.
Default value is no tag value.
type
Indicates which type of notification should be generated. Valid values are:
  • trap - an unconfirmed notification; notification sent with trap PDUs.
  • A '-' (dash) - indicates the default.
Default value is trap.
TARGET_ADDRESS
Defines a management application's address and parameters to be used in sending notifications. Format is:
targetAddrName tDomain tAddress tagList targetParams timeout retryCount storageType
where:
targetAddrName
Indicates a locally unique identifier for this target address definition. Valid values are:
  • An octet string of 1 to 32 octets (characters).
There is no default value.
tDomain
Indicates the transport type of the address indicated by tAddress. Valid values are:
  • UDP - for UDP datagrams.
  • A '-' (dash) - for the default value.
Default value is UDP.
tAddress
Indicates the transport address to which notifications are sent. Valid values are:
  • A 1- to 21- octet string indicating the IP address and optionally the UDP port.
Form is
 ip_address:port
IP address must be specified as a.b.c.d where a, b, c and d are in the range of 0 to 255. The port, if specified, must be in the range of 1 to 65535. Example:
9.37.84.48:162
The IP address may not be defaulted, but the port, if not specified, will default to 162.
tagList
Indicates a list of tag values which are used to select target addresses for a notification operation. RFC2273 contains the complete definition of SnmpTagList and SnmpTagValue. The AIX implementation accepts as valid values:
  • An octet string of 1 to 255 octets (characters). No delimiters are allowed.
  • '-' indicates the default.
The default value is an empty list.
targetParams
Indicates a TARGET_PARAMETERS paramsName value that indicates which security and message processing is to be used in sending notifications to this target. Valid values are:
  • An octet string of 1 to 32 octets (characters)
There is no default value.
timeout
Indicates the expected maximum round trip time for communicating with this target address (in 1/100ths of a second). timeout is used only for inform type notifications; it is not used for traps. Valid values are:
  • An integer in the range of (0..2147483647) specifying the number of hundredths of a second for the timeout. Note, however, that this value is not used for notifications of type trap.
  • '-' (dash) indicating the default.
Default value is 0, meaning no timeout value.
retryCount
Indicates the number of retries to be attempted when a response is not received for a generated message. retryCount is used only for inform type notifications; it is not used for traps. Valid values are:
  • An interger in the range of (0 to 255), indicating the number of retries to be attempted. Note, however, that this value is not used for notifications of type trap.
  • A '-' (dash) indicating the default.
Default value is 0, meaning no retry.
TARGET_PARAMETERS
Defines the message processing and security parameters to be used in sending notifications to a particular management target. Format is:
paramsName mpModel securityModel securityName securityLevel storageType
where:
paramsName
A locally unique identifier for this target parameters definition. Valid values are:
  • An octet string of 1 to 32 octets (characters).
There is no default value.
mpModel
The message processing model to be used in sending notifications to targets with this parameter definition. Valid values are:
  • SNMPv1 - indicates SNMPv1.
  • SNMPv2c - indicates SNMPv2c.
  • SNMPv3 - indicates SNMPv3.
There is no default value.
securityModel
Indicates the security model to be used in sending notifications to targets with this parameter definition. Valid values are:
  • SNMPv1 indicates SNMPv1.
  • SNMPv2c Indicates SNMPv2c.
  • USM indicates User-based Security Model.
There is no default value.
securityName
Ientifies the principal (user or community) on whose behalf SNMP messages will be generated using this parameter definition. For community based security, this would be a community name. For USM, this would be a user name. Valid values are:
  • An octet string of 1 to 32 octets (characters).
There is no default value.
securityLevel
Idicates the security level to be used in sending notifications to targets with this parameter definition. Valid values are:
  • noAuthNoPriv or none - indicates no authentication or privacy. protocols applied.
  • AuthNoPriv or auth - indicates authentication protocols applied but no privacy protocol is applied.
  • AuthPriv or priv - indicates both authentication and privacy protocols applied. (If the additional encryption pack is not applied, this level can be configured, but not actually used.)
  • '-' (dash) - indicates default.
Default value is noAuthNoPriv.
NOTIFY_FILTER_PROFILE
Associates a notification filter profile with a particular set of target parameters. The format of this parameter is as follows:
targetParamsName profileName storageType
The following list explains the meaning of the variables in the previous format:
  • targetParamsName: Defines the message processing and security parameters to be used in sending notifications to a particular management target.
  • profileName: A locally unique identifier for this profile name definition. The valid value for this parameter must be an octet string of 1 through 32 octets (characters). No default value is defined for this parameter.
  • storageType: Indicates the type of storage in which this definition is to be maintained.
NOTIFY_FILTER
Determines whether particular management targets receive particular notifications. The format of this parameter is as follows:
profileName filterSubtree filterMask filterType storageType
The following list explains the meaning of the variables in the NOTIFY_FILTER parameter's format:
  • profileName: A locally unique identifier for this profile name definition. The valid value for this parameter must be an octet string of 1 through 32 octets (characters). No default value is defined for this parameter.
  • filterSubtree: Indicates the MIB subtree. When the filterSubtree parameter is combined with the corresponding instance of snmpNotifyFilterMask, it defines a family of subtrees that are included in, or excluded from, the filter profile. The following values are valid:
    • An object ID of up to 128 sub-object IDs
    • A textual object name (or object prefix)
    • A combination of textual object name followed by numeric sub-object IDs
    The name must be found within the compiled MIB or in the logical extension to the MIB, the MIBS.DEFS file. There is no default value.
  • filterMask: Indicates the bit mask in combination with the corresponding instance of snmpNotifyFilterSubtree. This parameter defines a family of subtrees that are included in, or excluded from, the filter profile. The valid values must be an octet string of 0 through 16 octets. The default value is an octet string with a length of zero.
  • filterType: Indicates the type of the filter definition. The following values are valid:
    • included: Indicates the family of filter subtrees defined by this entry that are included in a filter.
    • excluded: Indicates the family of filter subtrees defined by this entry that are excluded from a filter.
    • - (dash): Indicates the default value.
    The default value for this parameter is included.
  • storageType: Indicates the type of storage in which this definition is to be maintained.
COMMUNITY
Defines a community for community-based security. Format is:
communityName securityName securityLevel netAddr netMask storageType
where:
communityName
Indicates a community name for community-based security (SNMPv1 or # SNMPv2c). Valid values are:
  • An octet string of 1 to 32 octets (characters).
There is no default value.
securityName
Indicates a securityName defined for this communityName. The securityName is the more generic term for the principal (user or community) for which other entries, such as VACM_GROUP and TARGET_PARAMETERS, are defined. Typically, the securityName would match communityName or, at least, there would be a one-to-one correspondence between securityName and communityName. (Until the community MIB support is implemented, the community name must match the securityName exactly.) Valid values are:
  • An octet string of 1 to 32 octets (characters).
  • '-' (dash) - indicates default.
The default value is securityName equal to the specified communityName.
securityLevel
Indicates the security level to be applied when processing incoming or outgoing messages with this community name.
Note: When the communityMIB is implemented, authNoPriv will also be a valid level of security, but at the moment, it will be rejected because there is no way to store a securityLevel to be associated with a communityName. When that happens, the following will be added to the list of valid values below:
  • authNoPriv or auth - indicates authentication protocols applied.
Note that no additional authentication checking is done by specifying auth. Authentication still involves verifying that the community name is being used by an IP address for which it has been defined and using the views defined for that entry. However, allowing the specification of auth here does allow the system administrator to define a different set of views to be used if the same community name is defined with two different securityNames (each with a different securityLevel)
Valid values are:
  • noAuthNoPriv or none - indicates no authentication or privacy protocols applied.
  • '-' (dash) - indicates default.
Default value is noAuthNoPriv. Encryption is not supported on SNMPv1/SNMPv2c messages.
netAddr
A network address indicating the range of addresses for which this community name might be used. The following values are valid:
  • An IPv4 network address in the form of a.b.c.d, where a, b, c, and d are in the range of 0 through 255. However, not all of the four octets are required. Also, 255.255.255.255 is not a valid network address.
  • An IPv6 network address.
netMask
An IP address mask to be logically ANDed with the origin address of the incoming SNMP message. If the resulting value equals the value specified for netAddr, the incoming message is accepted. The following values are valid:
  • A network address in the form of a.b.c.d, where a, b, c, and d are in the range of 0 through 255. However, not all of the four octets are required.
  • A prefix length in the range of 0 through 128 for IPv6 address.
There is no default value.
storageType
As defined above on the USM_USER definition (Note, until the community MIB is implemented, storage type values other than readOnly will be treated as readOnly; i.e., they cannot be changed dynamically.)
DEFAULT_SECURITY
Identifies the default security posture to be configured for the SNMP agent; additional security definitions defined by the use of the preceding eight entry definition types augment any default security configurations defined as a result of the DEFAULT_SECURITY statement. Format is:
securityPosture password privacy
where:
securityPosture
Indicates the default security posture to be configured for the SNMP agent, as defined by Appendix A of RFC 2275 (and outlined below). Valid values are:
  • minimum-secure - indicates the SNMP agent will be configured with the least secure default configurations
  • semi-secure- indicates the SNMP agent will be configured with moderately secure default configurations.
  • no-access - indicates the SNMP agent will be configured with no default configurations.
The default value is no-access.
password
Indicates the password to be used to generate authentication and privacy keys for user 'initial' In the case that no-access is specified as the securityPosture, this keyword is ignored. Valid values are:
  • An octet string of 8 to 255 octets (characters).
  • '-' (dash) - indicating the default.
Default value is no password. Default only accepted if securityPosture is no-access.
privacy
Indicates whether or not encryption is to be supported for messages on behalf of user 'initial'. Valid values are:
  • Yes - indicates privacy is supported for user 'initial' (only with the additional encryption product).
  • No - indicates privacy is not supported for user initial.
  • '-' (dash) - indicates default value.
Default value is no. If no-access is selected as the security posture, this value will be ignored.
Default security definitions based on the selected security posture:
no-access
No initial configurations are done.
semi-secure
The default (null) context is configured. If privacy is not requested, a default user is configured as if the following USM_USER entry had been specified. USM_USER initial- HMAC-MD5 none - N permanent where ### indicates the key generated from the password specified on the DEFAULT_SECURITY entry. If privacy is requested (and available with the additional encryption product) , a default user is configured as if the following USM_USER entry had been specified: USM_USER initial - HMAC-MD5 ### DES ### N permanent where ### indicates the key generated from the password specified on the DEFAULT_SECURITY entry.
A default group is configured as if the following VACM_GROUP entry had been specified:

VACM_GROUP initial USM initial readOnly. Three default access entries are configured as if the following VACM_ACCESS entries had been specified:

 
VACM_ACCESS initial - exact none.   USM restricted - restricted  readOnly.  
VACM_ACCESS initial - exact auth.   USM internet   internet  internet   readOnly 
VACM_ACCESS initial - exact priv    USM internet   internet  internet   readOnly 
Two default MIB views are configured as if the following 
VACM_VIEW entries .had been specified:  
VACM_VIEW internet   internet     - included readOnly     
VACM_VIEW restricted system       - included readOnly  
VACM_VIEW restricted snmp         - included readOnly
VACM_VIEW restricted snmpEngine   - included readOnly 
VACM_VIEW restricted snmpMPDStats - included readOnly  
VACM_VIEW restricted usmStats     - included readOnly  
minimum-secure
The default (null) context is configured. If privacy is not requested, a default user is configured as if the following USM_USER entry had been specified. : USM_USER initial - HMAC-MD5 ### none - N permanent where ### indicates the key generated from the password specified on the DEFAULT_SECURITY entry.
If privacy is requested (and available with the additional encryption product) , a default user is configured as if the following USM_USER entry had been specified: USM_USER initial - HMAC-MD5 ### DES ### N permanent where ### indicates the key generated from the password specified on the DEFAULT_SECURITY entry.

A default group is configured as if the following VACM_GROUP entry had been specified: VACM_GROUP initial USM initial readOnly.

Three default access entries are configured as if the following VACM_ACCESS entries had been specified:
VACM_ACCESS initial - exact none   USM restricted -    restricted       readOnly  
VACM_ACCESS initial - exact auth   USM internet   internet  internet    readOnly 
VACM_ACCESS initial - exact priv   USM internet   internet  internet 
readOnly
Two default MIB views are configured as if the following VACM_VIEW entries had been specified:
VACM_VIEW internet   internet     - included readOnly 
VACM_VIEW restricted internet     - included readOnly 
logging
Directs logging from the configuration file. Format is:
logging         file=</path/filename>   enabled|disabled
logging         size=<limit>            level=<debug level>
There can be no white spaces around the "=" in the file, size and level fields where </path/filename> specifies the complete path and filename of the log file. Valid values are: An octet string of 1 to 255 octets (characters). Default value is /var/tmp/snmpdv3.log enabled|disabled. Valid values are: 'enabled' - turns logging on; 'disabled' - turns logging off. Default value is 'enabled'.
<limit>
Specifies the maximum size in bytes of the specified logfile Valid values are: '0' - meaning unlimited. An unsigned integer number in the unit of byte. Default value is 0.
<debug level>
specifies the logging level. Valid values are: # 0, 1, 2, 3, or 4 Default value is 0.
logging         file=/usr/tmp/snmpdv3.log       enabled
logging         size=0                          level=0
smux entry
Sets the SMUX peer configuration parameters # Format is:
smux <client OIdentifier> <password> <address> <netmask>
Fields to the right of <client OIdentifier> are optional, with the limitation that no fields to the left of a specified field are omitted. Where <client OIdentifier> defines the unique object identifer in dotted decimal notation of the SMUX peer client. Valid values are: An unique object identifer in dotted decimal notation up to 128 sub-OIDs of that SMUX peer. There is no default value.
<password>
Specifies the password that snmpd requires from the SMUX peer client to authenticate the SMUX association. If no password is specified, there is no authentication for the SMUX association. Valid values are: An octet string of 8 to 255 octets (characters). Default value is null string
<address>
Identifies the host on which the SMUX peer client is running. The following values are valid:
  • A host name of 1 through 80 characters or an IPv4 address that must be specified in the format of a.b.c.d, where a, b, c, and d are in the range of 0 through 255
  • An IPv6 address.
The default value of the <address> member is 127.0.0.1
<netmask>
Specifies the network mask. Valid values are: network mask must be specified as a.b.c.d where a, b, c and d are in the range of 0 to 255. Default value is 255.255.255.255.
smux           1.3.6.1.4.1.2.3.1.2.1.2         gated_password  # gated

Any SNMP agent configuration entries added by dynamic configuration (SET) requests get added to the end of the snmpdv3.conf file.